Every label is a small contract between three materials — face stock, adhesive and liner — and the adhesive is the part that decides whether the label survives the warehouse, the freezer or the delivery route. The manufacturer's label adhesive family is documented across more than ten product listings: barcode labels with a transparent grade noted for no oil seepage and clean die-cutting, thermal paper labels, logistics labels, film labels, price labels, freezer labels and permanent sticker grades, plus a removable-direction listing for labels that must later come off cleanly.
Seven of the family's listings publish the same parameter table (the label adhesive, label glue, two adhesive-for-labels, barcode, thermal paper and logistics label listings): viscosity of 1,500–3,500 cps at 180°C, a softening point of 70–100°C, a working temperature of 150–180°C, film-wrapped blocks of 0.45, 0.6, 1 and 5 kg, and a 1,000 kg minimum. Other label listings publish different values or none: the permanent sticker grade, for example, runs lighter, at 600–1,000 cps — varying with the substrate, as its listing states — with a 60–80°C softening point and blocks up to 1 kg, which is a useful reminder that 'label adhesive' is a family of grades, and the right one is matched to the face stock and the service conditions of the label.
| Documented label adhesive listings | Value |
|---|---|
| Viscosity (at 180°C) | 1,500–3,500 cps on the documented label listings |
| Softening point | 70–100°C on the documented label listings |
| Working temperature | 150–180°C on the documented label listings |
| Block specification | 0.45 / 0.6 / 1 / 5 kg per block |
| Minimum order | 1,000 kg on the documented label listings |
Label Types in This Family
Label failures are specific, and each maps to a grade property: edges lifting on small-diameter containers point to flexibility and tack; labels falling in cold storage point to low-temperature adhesion; ooze at the die points to the adhesive's flow behaviour at coating weight. The manufacturer's own troubleshooting tradition — its published guide to lifting label edges works through root causes of exactly this kind — is the right frame: describe the failure precisely in your enquiry and the grade discussion starts from the failure, not from a catalogue page.
How to Specify This Adhesive
A useful enquiry names five things: the substrate or material being bonded, the application method and equipment, the coat weight in grams per square metre where it is known, the temperature the bond must withstand in service, and the test standard your customer applies. Those five points are the same starting points the manufacturer's own customisation process uses when it opens a new formulation brief, and they let the laboratory match an existing grade before anyone talks about developing a new one.
If you are replacing an adhesive already in production, send its current grade name or a sample description — viscosity behaviour, colour and the failure you are trying to fix (edge lifting, ooze, stringing, cold failure) narrow the choice faster than a catalogue number. Samples are part of the documented route: free samples are listed on many product pages, and the freight arrangement for your sample is confirmed in the reply.
Supply, Packing and Samples
The documented minimum order on product listings is 1,000 kg, consistent with the 1-tonne minimum stated in the manufacturer's published frequently asked questions, and the documented production cycle is 7–15 days. Packing follows the listing for the grade — film-wrapped blocks are the standard form, with carton packing stated per product — and can be confirmed against your handling requirements in the quotation. Nothing on this page promises a grade's availability before the quotation confirms it for your specification.
Which label adhesive suits thermal paper?
A thermal paper label listing is documented in this family. Thermal papers are heat-sensitive, so the grade and the coating conditions are matched together; send the paper type and line speed with your enquiry.
Do you supply removable label adhesive?
A removable-direction listing is documented, positioned for firm adhesion during use and clean removal later, for recyclable packaging and temporary labels. Performance depends on the face stock, so it is sampled before bulk.
What minimum applies to label adhesive?
The documented listings state 1,000 kg, and blocks are film-wrapped at 0.45, 0.6, 1 and 5 kg.
Send the application, substrate, application method and the quantity you need — the grade, sample route and price are confirmed per product in the written quotation.
Request a Quotation